Advertisement
Figure 5 Two Zone Volume Control Wiring
Volume controls provide flexibility and customization to make the system reliable
and easy to use. Consult your local Niles' dealer for more information about using
volume controls.
Recommended Amplifier Power
We recommend an amplifier with a power rating of ten to one hundred watts per
channel for optimum performance. Outdoor speakers typically require more power
than indoor speakers. The outdoor environment is usually noisier and has less
reflective surfaces to make the system sound louder. Therefore, the use of a higher
power amplifier is recommended.
Ironically, most speakers are not damaged by large amplifiers but by small
amplifiers. When playing the loudspeaker at higher volumes, a small amplifier
will run out of power very quickly. When an amplifier runs out of power it creates
damaging "clipping" distortion. A large amplifier will play at the same volume
without causing this distortion.
If the plan requires connecting two RS5 speakers on one amplifier channel, an
amplifier rated to drive a 4-ohm load of thirty watts to two hundred watts, is
recommended. If you use two RS5's on one channel and the amplifier is not rated
for driving a 4-ohm load, the amplifier will run out of power more easily and could
damage the speakers.
See the section "Operation" for more information about clipping distortion.
9
Advertisement
