Niles CS525 Installation And Operation Manual page 13

Blueprint series in-wall loudspeaker contractor series
Table of Contents

Advertisement

Figure 6
plenum rated wire (check your local
building codes, some municipalities
require conduit).
In traditional wood stud/drywall construc-
tion you can cut the hole for the speaker
and utilize the large hole to auger holes
across, up or down the wall for as far as
your drill bit will take you. If you have
matching paint and take reasonable care in
patching you can cut a hatch in the dry-
wall at each stud, run your wire, and patch
and touch-up the wall (See Figure 7).
When you are dealing with the unknown
because of the structure of your home, or
with difficult to patch wall materials like
plaster, lath and plaster, faux finishes,
wallpaper etc., be patient. A careful study
of the potential problems before you start
the job will pay off.
Figure 7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs650

Table of Contents