Makita DHR242 Instruction Manual page 11

Drilling in wood or metal
1
2
► 1. Chuck adapter 2. Keyless drill chuck
1
2
► 1. Sleeve 2. Ring
Use the optional drill chuck assembly. When installing it,
refer to "Installing or removing the bit" described on the
previous page.
Set the action mode changing knob so that the pointer
points to the symbol.
For Model DHR243
CAUTION:
• Never use "rotation with hammering" when the
drill chuck assembly is installed on the tool. The
drill chuck assembly may be damaged. Also, the
drill chuck will come off when reversing the tool.
1
► 1. Quick change chuck for SDS-plus 2. Change
cover line 3. Change cover
2
3
2
► 1. Spindle 2. Quick change drill chuck 3. Change
cover 4. Change cover line
Use the quick change drill chuck as standard equip-
ment. When installing it, refer to "changing the quick
change chuck for SDS-plus " described on the previous
page.
2
► 1. Quick change drill chuck 2. Sleeve 3. Ring
Hold the ring and turn the sleeve counterclockwise to
open the chuck jaws. Place the bit in the chuck as far as
it will go. Hold the ring firmly and turn the sleeve clock-
wise to tighten the chuck. To remove the bit, hold the
ring and turn the sleeve counterclockwise.
Set the action mode changing knob to the
You can drill up to 13 mm diameter in metal and up to
32 mm diameter in wood.
11 ENGLISH
1
4
3
1
3
symbol.