Troubleshooting - Ernex Norsaw 805 User Manual

REPAIR
Routines at repair:
*The machine must only be repaired by qualified electricians or authorised service
workshops.
Testing the brakes:
*The brake for the saw blade rotation should be tested regularly. The stop-time must be
max. 10 sec. Start/stop the saw 10 times in a row and check the stop-time.
7.

TROUBLESHOOTING

The saw does not start:
* check the power supply
* do not use the cable with several machines at the same time
* check that the cable is not too long, and that the cross-section is not too small
* contact an electrician
The saw vibrates and is weak:
* check that the blade box below the saw table does not contain chips and sawdust
* check that the toothed belt is undamaged
* check the spindle
* check the blade for eccentricity, and that all the teeth are whole and sharp
The saw blade is heavy to lift and does not go down completely:
* check that nothing is stuck in the blade box
12