Cleaning The Appliance; Power Unit - White and Brown BL 571 COLUMBIA User Manual

- To make the cleaning easier, rinse the accessories soon after
use, as soon as they are withdrawn from the appliance.
- Handle blades with care. They are extremely sharp.
- Always clean the appliance after use.

POWER UNIT

- Always switch off and unplug from outlet after use and before
cleaning operation.
- Never let the power unit, cable or plug get wet.
- Wipe the power unit with a damp cloth, then leave to air dry.
- Never use abrasives or immerse in water or other liquids.
BLENDER GLASS jUG
- Fill with warm water, fit the blender lid and the feeder cap, then
switch on top speed for 20-30 seconds.
- Empty, then rinse. If it is still dirty, use a brush.
- Wipe, then leave to air-dry.
- Do not leave the blender in water to soak and do not leave
water inside of it.
BLADES (8)
- Remove the glass jug from its power unit, then turn it up side
down.
- Unscrew the cup base and dismantle the blades, the sealing
ring and the cup base.
- Clean them with hot water and dry thoroughly before
reassembling.
- Put the sealing ring to the edge of the blades, and put them to
the inner of the cup base.
- Mount the blender glass jug onto the cup base and turn the cup
base unit in clockwise direction.

CLEANING THE APPLIANCE

16