Turning Up Or Down Volume; Turning Off The Projector - NEC HT1000 User Manual

Turning Up or Down Volume

Sound level from the speaker on the projector can be adjusted.
VOLUME
Volume bar
increase volume
decrease volume
E-22

Turning off the Projector

To turn off the projector:
First press the POWER (ON/STAND BY) but-
ton on the projector cabinet or the POWER OFF
button on the remote control for a minimum of
two seconds. The power indicator will glow or-
ange. After the projector turns off, the cooling
fans keep operating for 90 seconds (Cooling-
off time).
Second, turn off the Main Power switch. The
power indicator will go out. Last unplug the
power cable.
CAUTION
Do not unplug the power cable from the
wall outlet or do not turn off the main power
under any one of the following circum-
stances. Doing so can cause damage to
the projector:
• While the Hour Glass icon appears.
• While the message "Please wait a mo-
ment." appears. This message will be
displayed after the projector is turned
off.
• While the cooling fans are running. (The
cooling fans continue to work for 90 sec-
onds after the projector is turned off).
• While accessing a PC card. (The PC Card
Access indicator lights.)
OFF ON
POWER
VIDEO S-VIDEO COMPONENT RGB
AUTO ADJ. DVI
ASPECT FREEZE 3D REFORM
EFFECTOR PICTURE VIEWER
POSITION MAGNIFY SLIDE
HELP VOLUME FOLDER
PIC-MUTE SLIDE
LIST