The Display - Pioneer MVH-AV270BT Installation Manual

Connection
Camera
About rear view camera
When you use the rear view camera, the rear view image is
automatically switched from the video by moving the shift lever
to REVERSE (R). Rear View mode also allows you to check
what is behind you while driving.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR
VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR
DAMAGE.
CAUTION
●
The screen image may appear reversed.
●
With the rear view camera you can keep an eye on
trailers, or back into a tight parking spot. Do not use for
entertainment purposes.
●
Objects in rear view may appear closer or more distant
than in reality.
●
The image area of full-screen images displayed while
backing or checking the rear of the vehicle may differ
slightly.
4
5 6
3
2
1
1 Rear view camera (ND-BC6) (sold separately)
2 To video output
3 RCA cable (supplied with ND-BC6)
4 This product
5 Brown (R.C IN)
6 Power supply
7 Power cord
8 Violet/white (REVERSE-GEAR SIGNAL INPUT)
 Power cord on page 3
Connect only the rear view camera to R.C IN. Do not connect
any other equipment.
Some appropriate settings are required to use rear view
cameras.
 For details, refer to Operation Manual.
External video component and

the display

3
4
7
8
1 Rear display with RCA input jacks
2 To video input
3 RCA cables (sold separately)
4 This product
5 Yellow (V OUT)
6 AUX input
7 Mini-jack AV cable (CD-RM10) (sold separately)
1
2
5
6
7
8 9
a b
3
c d
e
8 Yellow
9 Red, white
a To Yellow
b To Red, white
c To video output
d To audio outputs
e External video component (sold separately)
The appropriate setting is required to use the external video
component.
 For details, refer to Operation Manual.
WARNING
NEVER install the rear display in a location that enables
the driver to watch the video source while driving.
This product's rear video output is for connection of a display
to enable passengers in the rear seats to watch the video
source.
5