Multiple exposure lever
5
Taking a picture of different subjects or two or more of the same
subject on the same frame means multiple
exposure.
To make a
multiple
exposure,
observe the following
:
1) Take the first shot. (Press the shutter release button.)
2) Pull the multiple exposure lever in the direction of the arrow
shown in the
photo,
as you wind the film advance lever
fully.
The frame counter will not advance
;
only the shutter is ready
to be released
again.
Although the finger pulling the multiple
exposure lever will automatically slip off the lever as the film
advance lever is
wound,
multiple exposure operation will
have been performed
correctly.
3) After winding the film advance lever fully, take the second
shot.
To take three
exposures
or more on the same frame
,
repeat the
procedures described in 2) and
3).
Note:
In multiple exposure
photography,
the FM2 is
designed
to reduce
film dislocation to the
minimum.
But it may occur due to film
curling,
film
slack
or
inappropriate film
winding.
~
' - - "
-
"tt
-~-~---~--
-----
31