Intenso Memory 2 Move Manual page 69

Bonding this port to another router/switch to connect Memory 2 Move with the internet
The built-in Micro USB 3.0 is for faster data transfer and charging the internal battery when
connected directly into the computer's USB port or wall chargers. This works only by Power
ON mode
LED Off:
Green Color:
On:
Slowly Blinking:
Blinking Fast:
Red Color:
Steady Light:
Blinking Fast:
LED Off:
White LED:
Steady Light:
Blinking:
Blue LED:
Steady Light:
Blinking:
Blue Color:
Blinking: Starts the Initialization process
Steady Light:
LED Off:
Blue Color:
No LED:
The device is switched-off
Battery is fully charged
Battery charging
Device Shutting-Down
Less than 30% available power
Will soon shut-down, must be charged immediately
The device is switched-off or HDD is asleep
Ready to use
Connected into USB 2.0 Port
Read/Write activities
Ready to use
Connected into USB 3.0 Port
Read/Write activities
Initialization process completed
Ready to use
The device is switched-off
internet connection is ok
No connection established