Advertisement
Remote
Battery
Compartment
• Locate the battery compartment on the back of the remote.
• Loosen the screw in the battery compartment cover using a Phillips screw-
driver and lift to remove. (The screw will remain in the cover.)
• Insert two "AA" (LR6) alkaline batteries as indicated inside the battery
compartment.
• Replace the battery compartment cover and tighten the screw using a
Phillips screwdriver. Do not over-tighten.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove
exhausted batteries from this toy. Battery leakage and corrosion can cause
damage. Dispose of exhausted batteries safely.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the
"Battery Installation" instructions are to be used.
• If removable rechargeable batteries are used, they are only to be charged
under adult supervision.
• Rechargeable batteries are to be removed from the toy before they
are charged.
• If you use a battery charger, it should be examined regularly for damage
to the cord, plug, enclosure and other parts. Do not use a damaged bat-
tery charger until it has been properly repaired.
Battery Installation
3
Remote
Advertisement
