Fairchild Imaging MRDI User Manual page 16

LED
This command allows you to change the color. When selecting the option you need to, enter
the appropriate single digit number and hit enter.
command
You can input one of the following:
GDA
This command allows you to show all of the DACs (Digital to Analog Converter). When
selecting the option you need, enter the appropriate single digit number and hit enter.
The camera returns...
3:Gain F_odd = 0.490V
2:GainC_odd = 0.235V
4:Offset_odd = 1.199V
1:CML_odd = 1.425V
SDN
This command allows you to select one of the above DAC numbers, and change its value.
Example: SDN + enter + 486 + enter
GDN
This command allows you to verify what you just did under the SDN command.
Example: you would input the following GDN + enter + 1
The camera returns a value between
SAP
Store in Flash both correction memories, all registers and DAC values.
Store all parameters
RAP
Load from flash to camera. Recall all parameters.
Fairchild Imaging • CAM/CMOS-2K.LS Line Scan Camera User's Manual • Rev A • 16 of 41
Value
0
1
2
3
8:GainF_even = 0.490V
6:GainC_even = 0.235V
7:Offset_even = 1.199
5:CML_even = 1.425
enter value between 0 - 1023
0 - 1023
Value Function
0 Default factory calibrate
1 User
2 User
Value Function
0 Default factory calibration
1 User
2 User
Your screen will be blank during this
Function
Amber
Green
Red
Off