Tcp/Ip - Hawking HPS1U User Manual

8.5.2

TCP/IP

You can configure the print server to automatically get an IP
from DHCP server or manually specify a static IP. The print
server also has a built -in DHCP server. You can enable this
DHCP server and let it manage your IP address for you.
If you need the HPS1U to automatically get an IP address from
the DHCP server, select " Auto IP." You also can select
"Specify IP" to manually assign an "IP Address," "Subnet
Mask," and "Gateway" for the print server.
You can enable/disable the DHCP server and assign a range of
IP addresses here. The DHCP server is disabled by default.
You have to configure your "Start Address," "End Address,"