Remote Control - Naxa NTD-1956 Instruction Manual

Remote Control

Page 14
Press to turn the TV on or to
POWER place it in Standby mode.
MUTE Press to disable audio out-
put. Press again to restore
audio output.
Number Use the number keypad to
keypad input a value when prompted
(1-9, 0) on a menu or option screen.
Use the subchannel selector
–/––
key with the numeric keypad
to tune to a channel substa-
tion (e.g., 5-1, 5-2, 5–3).
RETURN Press to return to the previ-
ous channel.
P.MODE Press to cycle through the
picture mode presets.
S.MODE Press to cycle through the
sound mode presets.
SOURCE Press to access the input
source menu, then use the
arrow keys to change the
input source.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
VOL + Press to increase the volume
level.
VOL – Press to decrease the vol-
ume level.
PROG + Press to tune to a higher
channel.
PROG – Press to tune to a lower
channel.
Press to browse up in menu
and option screens.
Press to browse down in
menu and option screens.
Press to browse to the left in
menu and option screens.
Press to browse to the right in
menu and option screens.
ENTER Press to confirm a selection
in menu and option screens.
SETUP / Press to access (and exit) the
EXIT DVD system setup menu.
MENU Press to access (and exit) the
TV system setup menu.
Naxa Electronics