Samsung RF195** User Manual page 14

Setting up your French Door Refrigerator
Reassembling the freezer door (DRAWER TYPE - RF217,RF197)
1. Pull out the rails to the full length
on each sidle of the cabinet
evenly.
Slot
4. With the drawer pulled out fully,
insert the drawer box into the
rail system.
Reassembling the freezer door (SWING TYPE - RF215, RF195)
1. Place the hole in the bottom of
the freezer door over the right
side low hinge.
14_ setting up
Slot
2. Hang the freezer door front
onto open slot on the sides.
2. Replace the middle hinge connected to the freezer.
3. Insert and tighten the screw into the left and right middle hinges with
a philips screwdriver(+). Insert and tighten the 2 hex head bolts into
the left and right middle hinges with an allen wrench(3/16").
4. Replace the cap on the middle hinge.
3. With the 10mm wrench,
reattach 4 bolts to connect the
rail with the door.