Table of Contents
Advertisement
Basic Photography and Playback: Easy Auto Mode
Step 1 Turn the Camera On and Select G (Easy Auto) Mode
This section describes how to take pictures in G (easy auto) mode, an automatic,
"point-and-shoot" mode recommended for first-time users of digital cameras.
1
Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on.
Proceed to step 4 when U is displayed.
2
Press the shooting mode button.
The shooting-mode selection menu will be displayed.
3
Press the multi selector H or I to choose G
and press k.
The camera enters G (easy auto) mode.
4
Check the battery level and number of
exposures remaining.
Battery Level
Monitor
NO INDICATOR
B
N
Warning!
Battery
exhausted.
Number of Exposures Remaining
The number of pictures that can be stored will be displayed.
The number of pictures that can be stored depends on the capacity of the memory or
memory card and image mode setting (A 67).
18
Description
Batteries fully charged.
Batteries low; prepare to replace
batteries.
Cannot take pictures. Replace
batteries.
Easy auto mode
Battery level indicator
13 13 13
Number of exposures
remaining
Advertisement
Table of Contents
