Connectors - Sony KDL-32XBR6 Service Manual

NOTE: The components identifi ed by shading
and ! mark are critical for safety. Replace only
with part number specifi ed.

4-3. CONNECTORS

(Check the Sony Electronics Service Information
2-580-629-01 SCREW, +BVST 3X8
NOTE: The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached
to the TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration "Installation Procedure"
on Page 34 for KDL-32XBR6 and Page 48 for KDL-37XBR6.
INV
SP
REF. NO. PART NO.
101 1-835-266-11 LEAD WIRE WITH CONNECTOR (LVDS)
(KDL-32XBR6 ONLY)
101 1-835-267-11 LEAD WIRE WITH CONNECTOR (LVDS)
(KDL-37XBR6 ONLY)
102 1-910-043-81 CONN ASSEMBLY, 13P
103 1-910-043-82 HARNESS ASSEMBLY, 30P
(KDL-32XBR6 ONLY)
103 1-910-043-85 HARNESS ASSEMBLY, 30P
(KDL-37XBR6 ONLY)
KDL-32XBR6/37XBR6
NOTE: Les composants identifi es per un trame et
une marque ! sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifi e.
104
Power Unit
H4
H3E
DESCRIPTION [ASSEMBLY INCLUDES]
NOTE: The components identifi ed by a red outline and a
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
website for any additional service related issues for this model.)
BLOCK SWITCH
T-CON
CN602 (32)
CN602/603 (37)
CN601
102
103
REF. NO.
104 1-910-043-80
104 1-910-043-83
101
CN4700
1411
3201
CN2001
BU
SP
PART NO. DESCRIPTION
CONN ASSEMBLY, 14P
(KDL-32XBR6 ONLY)
CONN ASSEMBLY, 14P
(KDL-37XBR6 ONLY)
KDL-32XBR6/37XBR6
mark contain
[ASSEMBLY INCLUDES]
84