Cautions In Assembly - Panasonic ER-GB40 Service Manual

11. Remove the housing B.
12. Slide the chassis, and reversing the direction of the arrow.
13. Remove the battery o-ring and washer in battery. Take
out the rechargeable battery from the chassis.
4.2.

Cautions in Assembly

NOTE:
When reassembling, replace the new waterproof rubber.
Make sure whether there is NO foreign substance sticking
around a part covered with water seal.
4.2.1. Motor
1. Place the red mark on upper side. Fit the shape of motor
balancer and the hole of housing A and insert into hous-
ing A.
4.2.2. Rechargeable battery
1. Insert the rechargeable battery into chassis. Attach the
battery o-ring and washer to the battery.
4.2.3. Side terminal
1. Insert the side terminals on both sides.
5
ER-GB40