Scanning Special Originals (Thin Paper, etc.) from ADF
SADF
Special originals (thin paper, etc.) can be fed from the ADF, and scanned continuously using the Job
Build and SADF mode.
1
Place one original. (Minimum 64g/m
For details on how to place originals, refer to
Placing Originals (see page 6) and Basic
Operation Procedure (see page 9).
2
Press the Scan/Email key.
3
Select "Basic Menu".
4
Select "Job Build and SADF".
62
5
2
)
Select "Address Book", and then
select a destination.
For more details, refer to Basic Operation
Procedure (see page 9).
6
Press the Start key.
Place the next original within 5 seconds of
the last scanned original.
If the message "Another Original?" is
displayed, select "No" if you do not have any
more documents to scan.
When cancelling the operation, press the Stop key
on the Control Panel, and then select "Yes" on the
Touch Panel Display.
1
2