(5) Remove the Sheet Metal (C), Stopper while detaching the four bosses.
Sheet Metal (C),
Stopper
Bosses
Bosses
(6) Peel off the adhesive part of the LF-2027 Flexible Board.
Adhesive part
LF-2027 Flexible Board
(7) Remove the Frame (F-Sub-A), Frame (F-Sub-B), and Ball Bearing
while detaching the two bosses and the shaft.
Shaft
Frame (F-Sub-A),
Frame (F-Sub-B),
Ball Bearing
Bosses
HDR-CX630V/PJ630V/PJ650E/PJ650V/PJ650VE/PJ660/PJ660E/PJ660V/PJ660VE_L2
(8) Remove the six screws and remove the Frame (E-Sub-A), Frame
(E-Sub-B), and Ball Bearing while detaching the four bosses and
the shaft.
Screw
Screw
P
T O
Screw
Screw
Screw
Screw
P
T O
Bosses
Shaft
Bosses
Frame (E-Sub-A),
Frame (E-Sub-B)
Ball Bearing
(9) Disconnect the connector and remove the four screws to detach the
Sheet Metal (B), Stopper, Motor B, and LF-2025 Flexible Board.
Connector
Screw
Screw
Screw
Screw
Sheet Metal (B),
Stopper,
Motor B
LF-2025 Flexible Board
(10) Disconnect the connector and remove the three screws to detach
the Motor B.
Peel off the adhesive part of the LF-2025 Flexible Board.
Screw
Screw
Screw
LF-2025 Flexible
Board
Connector
Motor B
1-8
(11) Remove the three screws while turning the Plate of the Motor A to
detach the Motor A.
Plate of the Motor A
Screw
Plate of the Motor A
Screw
Screw
Screw
Adhesive part
Plate of the Motor A
Sheet Metal (B),
Stopper
Motor A
– ENGLISH –
Screw
Screw