Hitachi DH 24PE (S) Technical Data And Service Manual page 10

F. Groove digging and edging (striking only)
Cold chisel
(SDS-plus shank)
Code No. 316657
G. Grooving (striking only)
Grooving chisel
(SDS-plus shank)
Code No. 316659
H. Drilling holes and driving screws (rotation only)
Drill chuck, chuck dapter (G), special screw and chuck wrench
Special screw
Drill chuck adapter set (SDS-plus) (includes a, b, c)
a.
Chuck adapter (G) for SDS-plus shank system
b. 13 mm (1/2") Drill chuck 13VLR (with chuck wrench)
Special screw (M6 left-hand threaded)
c.
+
13 mm (1/2") Drill chuck
(13VLR type)
Chuck wrench
Part name
Cutter
(SDS-plus shank)
Code No. 316658
+
Chuck adapter (G)
(SDS-plus shank)
(NOTE)
If the tool is to be used for loosening screws, open the
three jaws of the drill chuck and securely fix the drill
chuck to chuck adapter (G) with the special screw (a left-
hand threaded M6 screw) when mounting the drill chuck
onto chuck adapter (G).
Code No.
303820
303623
950275
981122
--- 8 ---