Advertisement
Table of Contents
- 1 Battery Information
- 2 Remote Sensor
- 3 To Install or Replace the Batteries on both Units
- 4 On/Off Operation
- 5 Positioning the Thermometer Units
- 6 Thermometer Programming Operation
- 7 General Cooking Procedures
- 8 Timer Operation
- 9 Clock Feature
- 10 To Program the Clock
- 11 Care and Precautions
- 12 Transmission Collision
- 13 Questions about this Product
- 14 Minimum Internal Cooking Temperatures
- Download this manual
Advertisement
Table of Contents
Related Manuals for Taylor 1479
Summary of Contents for Taylor 1479
- Page 1 1479 / 532 / 817 Wireless Thermometer with Remote Pager plus Timer Instruction Manual...
- Page 2 Thank you for purchasing a Taylor Wireless ® Thermometer with Remote Pager plus Timer This product helps to eliminate over-cooking or under- cooking foods. Presetting the thermometer to the recommended cooking temperatures and/or cooking times is simple and ensures that food will be cooked to your preferred taste.
- Page 3 On/Off Operation 1. Place the base unit as close as possible to the remote sensor. This will ensure easy synchronization between the base and remote. Press “On/Off” on After set up is complete, keep the base unit units within effective transmission range (within 200 feet).
- Page 4 6. If transmission is interrupted, the ready light will stop blinking and the remote will vibrate 3 times every 30 seconds. To synchronize the units again, place the base and remote near each other and press and hold the “ ”...
- Page 5 4. Do Not stick to surfaces that exceed 200°F (100°C). Thermometer Programming Operation 1. Your thermometer is preset to read °F/°C selection temperatures in Fahrenheit. To switch to Celsius, push the switch on the back of the base unit to ºC. 2.
- Page 6 6. Press “Select” when the desired temperature is displayed. The Set Temperature digits stop flashing. The unit will beep, indicating the thermometer is set. 7. To change the programming, press the Meat button and repeat the steps above. General Cooking Procedures 1.
- Page 7 • When the current temperature is within 20 degrees of the target temperature, the remote will beep 3 times, vibrate and flash; the base will beep 3 times and flash. Note: the unit uses to different beep tones to help you identify between thermometer and timer notifications.
- Page 8 Timer Operation This unit is also equipped with a convenient timer. It can operate as an independent timer or work along with the thermometer function. 1. If necessary, turn the base and remote on (see on/off operation). 2. Press the “Timer/Thermometer” button. The Timer digits flash.
- Page 9 • 5 minutes before the time is up, the remote will beep 5 times, vibrate and flash. The base will beep 5 times and flash. • When the timer reaches zero, the units consistently beep, vibrate and flash (only remote vibrates) 7.
- Page 10 Care and Precautions 1. Always wear a heat resistant glove when touching the metal probe or cord during or just after cooking. DO NOT TOUCH WITH BARE HANDS! 2. Keep the metal probe and cord away from children. 3. Sterilize metal probe each time before use. 4.
- Page 11 Transmission Collision Signals from other household devices, such as doorbells, home security systems and entry controls, may interfere. This is normal and does not affect the general performance of this product. The trans- mission will resume once the interference recedes. Note: This device complies with part 15 of the FCC Rules.
- Page 12 Questions about this product: If service is required, do not return to retailer. For service call 1(866) 843-3905 from 7:30 am to 4:30 pm, Mountain Standard Time, Monday through Friday. To assist us in serving you, please have the model number and date of purchase available.
- Page 13 One Year Limited Warranty Taylor® warrants this product to be free from defects in material or workmanship for one (1) year from date of original purchase for original purchaser, excluding batteries. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair.