Mode Select Button - Sunpak PZ40X Instruction Manual

Mode Select Button

Chart 1
3D Multi Flashing Mode
(3D MULT-Mode)
TTL Mode
Manual Mode
Note; this chart shows how to select the functions and set the PZ40X using the Mode Select Button and the Zoom button.
Press the Mode Select Button
This mode can be used only when using an A-group camera.
When using a D-group camera, D-TTL Mode will be set.
With A-group cameras, repeated pressing
of the mode button will cycle the flash display
from 3DMULT Mode to TTL and through the
manual power ratio settings, returning to the
3DMULT Mode. (Other cameras will return to
the TTL Mode)
Press the Zoom button
6
English
A B C D