Nikon Coolpix S6100 User Manual page 199

Problem
Camera cannot focus.
Images are blurred.
Streaks of light or partial
discoloration are visible in the
monitor.
Bright specks appear in images
captured with flash.
Flash does not fire.
Digital zoom cannot be used.
Image mode not available.
Cause/Solution
• Subject is too close. Try shooting using macro
mode, or the Scene auto selector or Close-up
scene mode.
• The intended subject is one with which
autofocus does not perform well.
• Set AF assist in the setup menu to Auto.
• Turn camera off and then on again.
• Use flash.
• Increase the ISO sensitivity value.
• Enable vibration reduction or motion
detection.
• Use BSS (best shot selector).
• Use tripod and self-timer.
Smear occurs when extremely bright light
strikes the image sensor. When shooting with
Continuous set to Multi-shot 16 and when
recording movies, avoiding bright objects, such
as the sun, reflections of the sun, and electric
lights is recommended.
Flash is reflecting off particles in air. Set the flash
mode setting to c (off).
• The flash mode is set to c (off).
• Scene mode with which the flash does not
function is selected.
• On is selected for Blink proof in smart
portrait mode.
• Another function that restricts flash is
enabled.
• Digital zoom is set to Off in the setup menu.
• Digital zoom is not available in the following
situations.
- When Subject tracking is selected for the
touch shooting setting.
- When Scene auto selector, Portrait,
Night portrait or Pet portrait scene
mode is selected.
- When shooting in smart portrait mode
- When Continuous is set to Multi-shot 16.
Another function that restricts the Image mode
option is enabled.
Troubleshooting
A
39, 62,
68
31
160
21
34
55
158,
159
56
37
175
35
34
60
79
80
160
50
62, 64,
65, 71
76
56
80
187