Protecting Multiple Images; Removing Protection From Images - Nikon Coolpix S6100 User Manual

Protecting Multiple Images

Multiple images can be protected at a time.
1
Switch to thumbnail playback mode (A 83),
tap the bottom tab to display the setting
controls, and tap d.
The monitor display switches to the Protect screen.
2
Tap the desired images to be protected.
When an image is selected, a check mark is displayed. To
cancel the selection, tap the image again.
Tap n or o, or rotate the zoom control to g (i) or f (h)
to change the number of images displayed.
3
Tap I.
The selected images are protected.
To exit without protecting images, tap J.

Removing Protection from Images

• To remove protection from an image, display a protected image in full-frame
playback mode, follow the procedure in "Protecting One Image" (A 104), and
tap Off in step 3.
• To remove protection from multiple images at a time, uncheck protected
images in step 2 of "Protecting Multiple Images."
d Protecting Important Images (Protect)
10
Protect
Protect
105