Setting Up; Toasting Tips - Dualit DDP2 Instruction Manual

SETTING UP

Read and follow these instructions before using your toaster.
1 REMOVE BEFORE 2
FIRST USE
Ensure your toaster is DO NOT STORE OR USE
unplugged and cool. YOUR TOASTER IN AN
REMOVE CARDBOARD APPLIANCE GARAGE OR
INSERTS FROM THE UNDER CUPBOARDS. A
SLOTS BEFORE FIRST USE. fire may occur if incorrectly
A fire may occur if incorrectly positioned.
positioned.
4 5
Place the toaster on an Ensure the toaster is
open level surface. Ensure positioned at least 200mm
the toaster is positioned at
CLEAR FROM WALLS.
least 200mm CLEAR FROM
ANY OVERHANGING
CUPBOARDS.
3
DO NOT STORE OR USE
YOUR TOASTER CLOSE
TO CURTAINS OR
FLAMMABLE MATERIAL.
A fire may occur if
incorrectly positioned.
6
THE CRUMB TRAY
CRUMB TRAY MUST
BE IN PLACE DURING
TOASTING.
08
7
UNPLUG 8
UNPLUG WHEN NOT IN DON'T FORGET TO REGISTER YOUR TOASTER AT
USE. WWW.DUALIT.COM/REGISTER
OR BY POST

TOASTING TIPS

Here are a few tips to help get the best out of your toaster.
• Different breads will toast at different rates, wholemeal bread takes longer than white bread,
fresh bread will take longer than day old bread. Remember to adjust your browning control
to allow for your particular type of bread.
• Your toaster is fitted with patented Perfect Toast Technology which calculates the
temperature of your toaster and surroundings to derive the precise toasting time. After the
first round of toast, the elements and toaster body will be heated up, subsequent rounds
will take less time to toast. You do not need to adjust your Browning Control.
• At any time during the toasting cycle you can lift the toasting lever and check the progress
of the toasting.
• Use the bagel setting to toast burger buns, bagels, muffins or tea cakes, this setting toasts
one side whilst gently warming the other.
• The thickest slice of bread that will fit in your toaster is 36mm thick. Forcing bread which
is too thick or too long into the slots will be difficult to eject once toasted and could cause
burning. If jammed, unplug and allow to cool before removing the bread.
• You may find it easier to use a 'sandwich cage' to toast smaller items. Inserting and removing
items will be easier (sold separately).
• You may need to reduce the Browning Control time (see page 6) when toasting one
slice. There may be a slight variation in colour between each side. Equal size, thickness and
freshness are recommended when toasting two slices. When hand cutting a fresh loaf, cut
the slices as evenly as possible. Uneven slices will toast unevenly.
• Keep elements free from breadcrumbs and broken pieces of bread. If left these may burn
out the elements (see page 16 for Cleaning & Care).
• To reheat recently made toast set the browning control to 1.
• Cancel toasting manually at any time by pressing the cancel button on the browning control knob.
WWW.DUALIT.COM/REGISTER