Remote And System Operations; Passive Arming; Auto Re-Arming - Viper 5606V Owner's Manual

Hide thumbs Also See for 5606V:
Table of Contents

Advertisement

Remote and System Operations

Passive Arming*

Park and exit the vehicle, after the doors are closed the Passive arming
countdown begins. The led flashes quickly and upon reaching 20 sec-
onds the siren then chirps once. At 30 seconds the system arms itself.
Anytime before the system arms you can re-enter the vehicle or open
the trunk to load or unload items and, after closing passive arming
resumes.
To stay secure in case of accidental disarming the system, if a door
is not opened within 30 seconds the system re-arms itself and locks
the doors.

Auto Re-arming*

Auto re-arm ensures the vehicle stays protected if it is not entered after
disarming by remote control. After disarming by remote, the alarm
automatically re-arms itself (and locks the doors if programmed on) in
30 seconds. Open any point of entry to stop the re-arm until the next
disarm by remote.
Onetime Bypass*
Turn the ignition on for one to three seconds, and then off. The siren
chirps once to confirm one-time bypass is enabled.
One-time bypass can be used to temporarily bypass the Passive arm-
ing operation for one cycle. It also bypasses the comfort closure and
auxiliary channel outputs if programmed to activate when arming.
After the next disarm all operations return to normal.
* These features must be turned on by an authorized Directed dealer.
26
© 2016 Directed. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents