Heated Handles - Jonsered CS 2172 WH Operator's Manual

MAINTENANCE
Temperature -5° ° ° ° C (23° ° ° ° F) or colder:
For running the machine in cold weather or powder snow,
a special cover is available, which is mounted on the
starter housing. This reduces the intake of cold air and
prevents large amounts of snow from being sucked in.
CAUTION! If the special winterising kit has been fitted or
any measures have been taken to increase the
temperature these changes must be reversed before the
machine is used in normal temperature conditions.
Otherwise there is a risk of overheating, resulting in
severe damage to the engine.

Heated handles

(CS 2172WH)
On models with the designation W, the front as well as the
rear handle are equipped with electric heating coils.
These are fed with electrical current from an integrated
generator in the chain saw.
When the red mark on the switch is visible, the heating is
on.
Electrical carburetor heating
(CS 2172WH)
If this chain saw has the model code WH/CWH then it is
equipped with an electrically heated carburettor. The
electrical heating prevents icing in the carburettor. A
thermostat regulates heating so that the carburettor
always has the correct working temperature.
Canada
If this chain saw has the model code WH/CWH then it is
equipped with an electrically heated carburettor. The
electrical heating prevents icing in the carburettor. A
thermostat regulates heating so that the carburettor
always has the correct working temperature.
36 – English 1153687-49 Rev.2 2015-09-02