Troubleshooting Tips - GE UVB30 Owner's Manual And Installation Instructions

Troubleshooting tips ... Before you call for service
Save time and money! Review the charts on the following pages first and you may not need to call for service.
Problem
Fan does not work
Vent does not work
20
Possible Cause
The vent is not fully extended. Press the ON/OFF pad.
The vent is not plugged into an outlet. Plug the vent into a 120V power outlet.
The raise/lower pad did not engage the lift motor. Hold down the pad for a couple of
seconds to activate the motor.
The circuit breaker may have tripped. Check the circuit breaker— reset if necessary.
Sufficient makeup (replacement) air is required for exhausting appliances to operate to
rating. Check with local building codes, which may require or strongly advise the use
of makeup air. Visit GEAppliances.com for available makeup air solutions.
49-80777