(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
EAA00008
SYMBOLS USED IN
ASSEMBLY MANUAL
In order to simplify descriptions in this
assembly manuals, the following symbols
are used:
(1) Coat with lithium-soap-based-grease.
(2) Tighten to 10 Nm.
(10 Nm = 1.0mdkg = 7.2 ftdlb)
(3) Towards the front of the machine.
(4) Clearance required.
(5) Install so that the arrow mark faces
upward.
(6) Apply a motor oil.
(7) Made of rubber or plastics.
(8)
A: Ref No. (indicating the order of opera-
tions.)
B: Part name
C: Quantity of parts per machine.
D: Place where parts are held.
V: Stored in vinyl bag.
C: Stored in carton box.
S: Fixed
inside
the
and/or contained in the styrofoam
tray (upper or lower).
*: Temporarily installed or secured.
E: Size or material of parts.
d/D: Diameter of part.
l: Length of part.
ex, D = 5 (0.2) = 5mm (0.2 in)
steel
frame,