Motorola CLUTCH I465 User Manual page 107

to the Contacts list or press . to return to standby
mode.
To create a Contacts entry:
1. Press /
> Contacts > [New Contact]
2.
To assign a name to the entry:
. Enter the name and press r.
Select Name
3.
To assign a ring tone to the name:
Select and then select a ring tone.
Ringer
4. To assign a Contacts type to the number or
address being stored:
Select the Contacts type field.
Select a Contacts type (
, , ,
Home Email Fax Pager
or ).
Group, IP Other
5.
To store a number or address:
Select the # field (or ID for an email address, or IP
for an IP address).
Enter the number or address. For phone
numbers, use the ten-digit format. For Direct
Connect numbers, be sure to include the
asterisks (*).
.
, , ,
Mobile DC Work1 Work2
, , ,
Talkgroup Group Message
For email addresses, see "Entering Text" on
page 15.
When you are finished, press r.
6.
To assign more options to the number, including
and
Speed # Voice Name
proceed to steps 7-9. Otherwise, skip to step 10.
7. The default Speed Dial number assigned to a
phone number is displayed in the
This is always the next available Speed Dial
location. To assign the phone number to a different
Speed Dial location:
With the
Speed #
Press (right softkey) to delete the current
Delete
,
Speed Dial number.
Enter the new Speed Dial number and press r.
8.
To create a voice name for a number, select
Name . Follow the prompts to record a name. Speak
clearly into the microphone.
9.
When you are finished, press
10.
To add more numbers or addresses to the entry:
Scroll past the information you already entered.
, select and
[Options]
Speed #
field highlighted, press r.
(right softkey).
Back
8. Contacts
field.
Voice
99