Operation Instruction; General Instructions; Control Buttons And Connections - AOC i2430Ve Servise Manual

3. Operating Instructions

3.1 General Instructions

Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor
(See Figure ). By changing these settings, the picture can be adjusted to your personal preferences.
* The power cord should be connected.
* Press the power button to turn on the monitor. The power indicator will light up.

3.2 Control Buttons and Connections

4:3 or wide image ratio hot key: When there is no OSD, press> continuously to change 4:3 or wide image ratio. (If
the product screen size is 4:3 or input signal resolution is wide format, the hot key is disable to adjust)
e-Sensor hot key. When there is no OSD,Press < continuously to select the e - Sensor mode(e-Sensor mode hot
key may not be available in all mode ls). e-Sensor:The infrared sensor can detect if user is in front of monitor and
adjust monitor brightness automatically to save power. When it is on, we can select the detect range
[Near,Average,Far] by using hot-key.
Auto configure hot key When there is no OSD, press Auto/Source button continuously about 2 second to do auto
configure (Only for the
Source hot key When the OSD is closed, press Source butt on will be Source hot key function. Press Source button
continuously to select the input source showed in the message bar , press Menu/Enter button to change to the
source selected.
6