Table of Contents
Advertisement
4.3 Panel Specification
4.3.1 General Features
LM230WF3 is a Color Active Matrix Liquid Crystal Display with a Light Emitting Diode ( White LED) backlight
The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the
normally black mode. It has a 23 inch diagonally measured active display area with FHD resolution (1080 vertical by
1920 horizontal pixel array) Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in
vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each
dot, thus, presenting a palette of more than 16,7M colors with A-FRC (Advanced Frame Rate Control).
4.3.2 General Specifications
4.3.3 Electrical Characteristics
(Ta= 25± 2℃, VLCD =5.0V, VLCD=5.0V, Fv=60Hz,)
LED Bar Electrical Characteristics
4.3.4Optical Characteristics
22
Advertisement
Table of Contents
