Viewing The Connections - Side Connectors - Finlu 19H6030S Owner's Manual

Lcd hdmi colour television

Table of Contents

Note: S-VHS signal is supported via the scart socket(optional).

VGA Input

is for connecting a personal computer to the TV set.

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.

SPDIF Out

outputs audio signals of the currently watched source.

Use an SPDIF cable to trasfer audio signals to a device that has SPDIF input.

Viewing the Connections - Side Connectors

The CI Slot is used for inserting a CI card. A CI card allows you to view all the channels

that you subscribe to. For more information, see "Conditional Access" section.

Side USB input.

Note: That programme recording feature is available via this USB input. You can connect

external hard disk drives to this input.

Side audio-video connection input is used for connecting video and audio signals of

external devices. To make a video connection, you must use the supplied AV connection

cable for enabling connection. First, plug the single jack of the cable to the TV's Side AV

socket. Afterwards, insert your video cable's (not supplied) connector into the YELLOW

input (located on the plural side) of the supplied AV connection cable. The colours of the

connected jacks should match.

To enable audio connection, you must use RED and WHITE inputs of the side AV

connection cable. Afterwards, insert your device's audio cable's connectors into the RED

and WHITE jack of the supplied side AV connection cable. Colours of the connected jacks

should match.

The headphone jack is used for connecting an external headphone to the system.

Connect to the HEADPHONE jack to listen to the TV from headphones.

The Control switch allows you to control the Volume/ Programme/ Source and Standby-

On functions of the TV.

To change volume: Increase the volume by pushing the button up. Decrease the volume by pushing the

button down.

To change channel: Press the middle of the button, the channel information banner will appear on screen.

Scroll through the stored channels by pushing the button up or down.

To change source: Press the middle of the button twice, the source list will appear on screen. Scroll through

the available sources by pushing the button up or down.

To turn the TV off: Press the middle of the button down and hold it down for a few seconds, the TV will turn

into standby mode.

MB62_[GB]_(01-TV)_woypbpr_IDTV_PVR_NICKEL17_5110UK_19965LED_10073978_50192728.indd 8

- 8 -

07.09.2011 11:52:26

Table of Contents