Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Powerline S4BL
Summary of Contents for Powerline S4BL
- Page 1 S4BL Crossline Laser INSTRUCTION MANUAL...
- Page 3 SAFETY Please read this instruction manual before operating this product. Please store this instruction manual in the carry case for future reference. CAUTION: Class 2 Laser Product Do not stare directly into the laser beam from apertures. Do not disassemble the instrument or attempt to perform any internal servicing as this will void your warranty.
-
Page 4: Item Checklist
ITEM CHECKLIST Please ensure the following items are included with your laser. If anything is missing please contact your retailer. Magnetic base Square Powerline S4BL Batteries Carry pouch... -
Page 5: Product Overview
PRODUCT OVERVIEW Control panel Vertical laser port (x1) Horizontal laser port (x1) Dot laser ports (x2) Power / locking switch... -
Page 6: Control Panel
CONTROL PANEL Power indicator Out of level indicator Pulse mode indicator MODE LINE Pulse mode Dot / line mode... - Page 7 DETECTOR CONTROL PANEL* Bubble vial Laser sensor Direction arrows Bubble vial Alignment indicator Direction arrows Power indicator On/off switch Speaker Sound on / off *The detector is an additional accessory which can be purchased from your retailer.
-
Page 8: Using Your Laser
USING YOUR LASER Power Supply The S4BL is powered by three AA alkaline batteries. Setting Up ‣ Select a place as close as practical to the work site. Ensure the location is clear of traffic. ‣ Place the laser on a level surface such as a bench or mount. - Page 9 Using The Magnetic Base ‣ Insert the magnetic end of the square ino the magnetic base. ‣ Screw the laser adapter into the base of the unit until firm.
- Page 10 Using Your Detector* ‣ Press the pulse mode button on the control panel on top of the laser to enter into pulse mode. ‣ Switch the detector on and move it into the path of the laser beam. ‣ Hold the detector upright for horizontal beams. Rotate the detector 90° for vertical beams.
-
Page 11: Care And Maintenance
‣ Always turn the on/off lock to “off” when transporting the unit. ‣ Whenever possible, store the instrument in a dry, shady location. ‣ The S4BL should be calibrated every 6 months, if ongoing accurate levelling is required or an impact has occurred. -
Page 12: Warranty
WARRANTY The Powerline S4BL comes with a 3 year manufacturers warranty. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. - Page 13 30 Day Free Service If your laser is out of calibration within the first 30 days of purchase you are entitled to a free calibration adjustment. For more information please contact your retailer or Spot-on. Customer Support To assist you with any queries or technical questions please contact the customer support line: 1300 658 338...
-
Page 14: Specifications
SPECIFICATIONS Specifications Powerline S4BL Product code 50068 Warranty 3 Years Accuracy ±3mm at 10m Range 50m (detector) Levelling range ±4° Laser class 2 Red Battery life 10 hours Battery type 3x AA Vertical lines Horizontal lines Dots IP rating Weight (kg) 0.55... - Page 16 www.spoton.com.au...
Need help?
Do you have a question about the S4BL and is the answer not in the manual?
Questions and answers