Functional Description - Bosch GGS Professional 6 Original Instructions Manual

OBJ_BUCH-1050-002.book Page 20 Tuesday, November 2, 2010 3:50 PM
20 | English

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for grinding and deburr-
ing metal using corundum grinding accessories.
The machine is also suitable for working with
wire brushes.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Clamping nut (GGS 6 S)
2 Protection guard (open) with locking screw
(GGS 6 S)
3 Grinder spindle
4 Mounting flange (GGS 6 S)
5 Spindle collar
6 On/Off switch
7 Safety switch against starting/Lock-on but-
ton for On/Off switch
8 Quick-clamping nut
9 Clamping nut (GGS 6)
10 Clamping flange
11 Protection guard (enclosed) with locking
nuts (GGS 6)
12 Mounting flange (GGS 6)
13 Handle (insulated gripping surface)
14 Locking screw for protection guard
15 Holding rod
16 Two-pin spanner for clamping nut
17 Index mark
18 Snap ring
19 Locking nut for protection guard
20 Open-end spanner, size 24 mm*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
1 609 929 S82 | (2.11.10)
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 86 dB(A);
Sound power level 97 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Overall vibrational values (vector sum of three
directions) determined according to EN 60745:
Grinding surfaces (roughing): Vibrational emis-
sion value a
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
*
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
2
=2.5 m/s , uncertainty K=1.5 m/s
h
Bosch Power Tools
2
.