Internal Wire Arrangement And Wiring Work - Hitachi DH 20PB Technical Data And Service Manual

9-6. Internal Wire Arrangement and Wiring Work

Armature [46]
Transparent (neutral wire of
Noise Suppressor [60])
Speed Control Switch and
Reversing Switch [59]
Put the lead wires from the Stator [49]
under the Brush Holder [63]
Fig. 13 Schematic diagram
--- 21 ---
Brush Terminal
Choke Coil
Carbon Brush [62]
Brown (from the
Carbon Brush [62])
Gray (from the
Stator [49])
Black (from the
Stator [49])
Red (from the Stator
[49])
Blue (from the
Carbon Brush [62])
White (from the
Stator [49])
Choke coil
Noise Suppressor [60]
Cord [72]