System Connections - Nextar M3-06 Hardware Instruction Manual

System
Connections
Always ensure that the unit and any other external device connected to the unit are
switched off and unplugged from the power supply before you attempt to connect
the unit to any external device.
Connecting to PC
The unit is designed with a USB port which allows you to connect the unit to a PC for
map updating. See the figure below for details:
System requirements:
-Windows 98SE, ME, 2000, and XP
(Driver required for Windows 98SE)
-DVD Rom Drive (for map upgrade purposes)
-Intel Pentium II 233 Mhz
-64 MB RAM
-50 MB available hard drive space
-Available serial port and/or USB Port
-256-color display adaptor and monitor
(16 bit color required)
In the near future, map updates will be available for down load from our website. Please
check www.nextar.com periodically for the information on downloads.
8