Related Manuals for Loctite Hysol 050
Summary of Contents for Loctite Hysol 050
- Page 1 EQUIPMENT Operation Manual Loctite ® Hysol ™ 050 Hot Melt Applicator 120 Volt Part No. 98544, 230 Volt Part No. 98546 Loctite ® Hysol ™ 050-HT Hot Melt Applicator 120 Volt Part No. 98545, 230 Volt Part No. 98547...
- Page 2 ™ ® ™ VAC power supply and the applicator will be ready for use in 5 minutes. Glue sticks can be fed continuously through the back of the applicator. Use only genuine Loctite brand Hysol adhesive glue sticks. ® ®...
-
Page 3: Technical Data
• Foam materials, like polystyrene, can be easily bonded to other surfaces. However the adhesive must be applied to the other surfaces, not to the foam. • Use only genuine Loctite ® Hysol ® hot melt adhesive sticks to ensure reliable performance. Loctite ® Hysol ® hot melt adhesive sticks are non-toxic and non-flammable. - Page 4 3 HOLE EXTENSION NEEDLE SPREADER “L” NOZZLE “T” NOZZLE NOZZLE ADAPTOR Warranty Henkel Corporation expressly warrants that all products referred to in this Instruction Manual for the Loctite Hysol 050 and ® ™ Loctite ® Hysol ® 050-HT Hot melt Applicators (hereafter called “Products”) shall be free from defects in materials and workmanship.