Alfa Romeo 159 Training Material page 95
Hide thumbs
Also See for 159:
- Owner's handbook manual (338 pages) ,
- Owner's manual (330 pages) ,
- User manual (8 pages)
Table of Contents
Advertisement
ENGINE
The sensor connections to the engine ECU are:
CONNECTION TO ECU
Timing sensor 1
- connector pin 1 to ECU pin 7 side
A (ground)
- connector pin 2 to ECU pin 41
side A
- connector pin 3 to ECU pin 24
side A (power)
Timing sensor 2
- connector pin 1 to ECU pin 7 side
A (ground)
- connector pin 2 to ECU pin 56
side A
- connector pin 3 to ECU pin 24
side A (power)
REMOVAL/REFITTING: The sensor is fitted by being pressed into its housing. Lubricate the seal with mineral oil. It is
fastened with a screw.
POSITION: The timing sensors are positioned on the right-hand side of the camshafts.
1.
Camshaft timing sensors
Traccia Didattica Alfa 159-en-ridotta
ALFA 159 TRAINING MATERIAL
CONNECTOR
95/318
Fiat Auto S.p.A.
After Sales Training
DRAWING
© 2004 Fiat Auto S.p.A. - All rights reserved
1
Advertisement
Table of Contents
