Table of Contents
Advertisement
Figure 7
1. LED indicators (level of
charge)
2. Release button
2. Slide the battery into the charger until it clicks into place.
3. To remove the battery, press up on the release button and
slide the battery backward out of the charger.
3. Battery terminal
4. Refer to the table below to interpret the LED indicators on
the battery charger.
LED COLOR
Top
Bottom
Red
Red
Red
Green
Red
Orange
Service
Toro has designed this product to give you years of trouble free
use. Should it need service, bring the product to your Authorized
Toro Service Dealer. Your Toro Dealer is specially trained to repair
Toro products and will ensure that your Toro stays "All" Toro.
Storage
Store the blower indoors, in a cool dry location, out of reach of
children and animals.
Troubleshooting
If your blower fails to run when you turn it on, check the following
before contacting your Authorized Toro Service Dealer:
•
Ensure that the battery is fully charged.
•
Ensure that the battery is secured in place on the back of the
blower and that it is fully seated.
Using the battery when it is hot can reduce the operating time.
Remove the battery from the charger and allow it to cool before
placing it back into the sweeper.
Using the battery when there is moisture on the leads can cause
the blower to malfunction. Allow the battery to dry or wipe it dry
before placing it back into the blower.
6
Indicates:
Battery is charging
Fully charged
Battery is too
warm: Remove
for approximately
30 minutes
Advertisement
Table of Contents
