Adjusting Brightness - Ferrari 2012 F12 Berlinetta Owner's Manual

Once the function has been selected, the individual subfunctions or
parameters that can be activated are displayed. To select them, use
the UP and DOWN buttons and press and quickly release the OK
(or RIGHT) button to activate another subsection or activate the
selected parameter.
To go back to a previous level in the menu hold down the OK
button, press the LEFT button or select the BACK item which is
normally in the list of subfunctions. If no operation is performed
for at least 10 seconds, the first menu level reappears on the
display.

Adjusting brightness

The brightness of the two TFT displays on the instrument panel
can be adjusted by selecting the special item on the MENU screen
page or by using the UP and DOWN buttons when the MENU
screen page is not displayed or the chronometer is off if the
Chronometer screen page is displayed.
The first time one of the two buttons is pressed, the screen page
is displayed. The next time the buttons are pressed, the brightness
can be adjusted.
The adjustment made, which can be activated even when the
vehicle is moving, can be seen immediately and does not affect the
brightness of the warning lights on the panel.
The screen page disappears when the OK button is pressed or
automatically if it is not used for 5 seconds and is replaced by the
screen page that was previously displayed.
DIMMING
About your Vehicle
3
91