Electronic Rev Counter; Engine Rpm Led On Steering Wheel - Ferrari 2012 F12 Berlinetta Owner's Manual

Electronic rev counter

The electronic rev counter indicates the engine RPM. The numbers
on the dial multiplied by 1000 correspond to the engine RPM in
one minute.
Avoid engine speed rates in the red sector.
There is a space to the bottom right of the rev counter for the
display which gives information on dual clutch transmission (DCT).
Important note
If the rev counter has a white or yellow background,
backlighting is not activated in daytime conditions (i.e. with
the running lights off or with the running lights on but with
the twilight sensor detecting daytime conditions) to improve
visibility of the gauge.
Engine RPM LED on steering wheel (optional)
The five LEDs on the steering wheel rim (available on request)
light up in sequence and inform the driver that the maximum
engine RPM has been reached for gearshifting. When 5500 RPM is
reached, the first LED comes on; the others come on in sequence
when 6250, 7000, 7750 and 8420 RPM are reached.
The LEDs on the steering wheel can be deactivated using the
MENU screen page on the left TFT display (see page 90): call up
the MENU screen page, select the items "Car setup" and "RPM on
steer" and then select OFF. To reactivate the function, select ON.
About your Vehicle
3
115