Fault Priority Levels; Indication Of Failure Of Turn Indicators And Running Lights - Ferrari 2012 F12 Berlinetta Owner's Manual

Fault priority levels

The simultaneous display of several faults follows a logic that
depends on the priority level assigned to it.
Priority level 0 - Extremely critical fault
Priority level 1 - Critical fault
Priority level 2 - Non-critical fault.
When several fault events occur at the same time, faults with
priority level 0 are displayed first, followed by priority level 1
and then priority level 2. The information on the various faults is
displayed in turn for 5 seconds each. In any case, the total display
time for each fault is never less than 20 seconds.
If a fault message with priority level 1 or 2 is being displayed, and
a new anomaly with the same priority level occurs, the last fault
message is only displayed after the first fault message has been
displayed for at least 2 seconds. If, on the other hand, another new
priority level 0 fault occurs, this is displayed immediately.

Indication of failure of turn indicators and running lights

A failure of the running lights (front and/or rear) and turn
indicators (front and/or rear) is indicated in the same way as other
faults but the vehicle symbol with the faulty running light or turn
indicator indicated in red is displayed together with a description
of the failure instead of the "External lights failure" symbol (see
page 110). When the display cycle ends or the OK button with
"ESCAPE" function has been pressed, the "External lights failure"
symbol is minimised.
Lamp failure
About your Vehicle
3
107