Changing Menu Options - Sony SLV-N700 Operating Instructions Manual

menu options
1
Press MENU.
2 Press -)/+ to move the cursor (b) to "Advanced
options," then press OK.
3 Press t/+ to move the cursor (b) to the option to change.
4 Press C/I) to change the setting.
5
Press MENU to exit the menu.
Menu choices
Initial settings are indicated in bold print.
Menu option
Tape select
Set this option to
l
T-l 20 when using a T-120 or shorter length tape.
l
T-160 when using a T-160 length tape.
l
T- 180 when using a T- 180 or longer length tape.
For details, see page 34.
Auto play
l ON
to start playback automatically, when you insert a tape
with its safety tab removed.
l
OFF to turn off Auto play. You need to press D PLAY to
start playback, even if you insert a tape with its safety tab
removed.
Auto repeat
Auto power off
Power save
l
ON to play back a tape repeatedly. The VCR rewinds a tape to
the beginning and restarts playback automatically.
l
OFF to turn off Auto repeat.
l
1Hr to turn off the VCR automatically one hour after the last
operation.
l
2Hr to turn off the VCR automatically two hours after the last
operation.
l
OFF to set no specific time to turn off.
l
ON to turn off the indicators in the display window during
standby mode to reduce the VCR's power consumption to a
minimum.
l
OFF to turn on the indicators in the display window while the
VCR is standing by.
VCR Output CH
l
3CH when using channel 3 to receive the VCR signal.
l
4CH when using channel 4 to receive the VCR signal.
For details, see page 53.
52 Changing menu options