Sony SLV-N700 Operating Instructions Manual page 32

To use the time counter
Press CLEAR at the point on the tape that you want to find later. The counter in the
display window resets to "0O:OO" or "0:OO." To search for the counter 0:OO:OO point
automatically, see "To search for the counter 0:OO:OO point" on page 50.
1 ,
To display the counter on the TV screen, press DISPLAY.
Notes
Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the
picture quality cannot be guaranteed.
While displaying a menu on the TV screen, you cannot use D PLAY, II PAUSE,
H FF, 44 REW, or
n
STOP buttons.
The counter resets to "0O:OO" or "0:OO" (in the display window) or "O:OO:OO" (on the TV
screen) whenever a tape is reinserted.
The counter stops counting when it comes to a portion with no recording.
When 10 hours have passed, the counter in the display window returns to "0:OO" and the
count starts over again.
When playback does not start even if you insert a tape with its safety tab removed, set "Auto
play" in the ADVANCED OPTIONS menu correctly (page 52).
The SLV-N700 can also play S-VHS tapes. The SLV-N700 will automatically identify the
type of tape inserted in the VCR (either VHS or S-VHS). When S-VHS tapes are played in
the SLV-N700, the enhanced resolution will not be visible on screen; there may also be
picture distortion while playing the S-VHS tape in slow motion or while utilizing other
special playback modes. The SLVN700 will not record in S-VHS mode on an S-VHS tape.
32
Playing a tape