# 1
Disassembly Hinge Cover.
# 3
1. Pull the front cover upward.
2. Then, let the all latches are separated.
3. Put the front face down.
# 5
Remove the 6 screws from each up of metal
frame
.
# 7
Remove Al-tape from control pcb fix.
DISASSEMBLY
# 2
# 4
# 6
# 8
- 8 -
Remove the screws.
Disassemble back cover
Pell off Al-tape from panel.
Remove the 4 screws from each side of metal
frame