Bosch GAS 35 M AFC Professional Original Instructions Manual page 18

OBJ_BUCH-1715-003.book Page 18 Monday, September 29, 2014 11:46 AM
18 | English
Symbols and their meaning
Automatic Start/Stop feature
Extraction of dusts resulting from running
power tools
The vacuum cleaner automatically switches
on and off with a time delay
Switching Off
Vacuuming
Vacuuming of deposited dusts
15 Airflow monitoring for a 15 mm hose
diameter
22 Airflow monitoring for a 22 mm hose
diameter
35 Airflow monitoring for a 35 mm hose
diameter
Min/Max Infinitely variable control of the vacuuming
power:
– Maximum vacuum capacity for applica-
tions with intense dust development
– Reduced vacuum capacity for applica-
tions with low dust development and for
control of the vacuuming power between
connected power tool and workpiece
surface (e. g. when sanding)
Specification of the allowable load of the
connected power tool (country-specific)
AFC Automatic filter cleaning
(AFC = Automatic Filter Cleaning)
1 609 92A 0XA | (29.9.14)
Symbols and their meaning
Attach only one L-Boxx (max.).
The weight of the L-Boxx with contents
must not exceed 15 kg.
 Do not hang the vacuum cleaner, e. g.
for transport purposes, to a crane
hook. The vacuum cleaner is not suitable
for handling by crane. Danger of injury
and causing damage.
 Do not use the vacuum cleaner as a
seat, ladder or stepladder. The vacuum
cleaner can tip over and become dam-
aged. Danger of injury.
Product Description and Specifica-
tions
While reading the operating instructions, unfold the graphics
page for the vacuum cleaner and leave it open.
Intended Use
The machine is intended for collection, vacuuming, conveying
and separation of wood chips, as well as non-flammable dry
dusts, non-flammable liquids and water-air mixtures. The vac-
uum cleaner is dust-technically checked and corresponds
with dust category M. It is suitable for the increased demands
of industrial usage, as required in trades, industry and work-
shops.
According to IEC/EN 60335-2-69, vacuum cleaners of dust
category M may only be used for vacuuming and extraction of
hazardous materials with an exposition limit value
3
≥ 0.1 mg/m .
Use the vacuum cleaner only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
Product Features
The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.
1 Container
2 Plug cap for the vacuum hose connection
3 Hose connection piece
4 Vacuum-hose holder
5 Socket for power tool
6 Airflow regulator
7 Mode selector switch
Bosch Power Tools