Hunter Antero Owner's Manual And Installation Manual page 11

Light Kit (continued) www.HunterFan.com
1.888.830.1326
Insert a third light kit assembly screw, Carefully push all switch housing
components into the switch housing,
found in the hardware bag, into place
and tighten all three screws securely. then install the switch housing plate
using two light kit assembly screws,
found in the hardware bag.
Make sure the light kit assembly is securely attached to the
motor housing. Failure to properly secure all three assembly
8
screws could result in the light fixture falling.
M3564-01 • 09/25/15 • © 2015 Hunter Fan Company