Hunter Antero Owner's Manual And Installation Manual page 10

Light Kit www.HunterFan.com
1.888.830.1326
Light Kit
Assembly
Screw
Feed the 9-pin plug connector coming from
Partially install two light kit assembly Align the keyhole slots in the top of
the bottom of the motor housing through
screws, found in the hardware bag, the light kit assembly with the partially
halfway into the motor housing as the center hole in the light kit assembly.
installed assembly screws. Wrap the
Connect it to the plug connector found
shown. It does not matter which two keyhole slots around the screws and
in the switch housing area of the light kit
screw holes you choose.
twist counterclockwise.
assembly. Make sure to line up the colored
markings on the connectors.
7
M3564-01 • 09/25/15 • © 2015 Hunter Fan Company