Table of Contents
Advertisement
4
Troubleshooting
16
Troubleshooting
Troubleshooting
General
Symptoms
The Power does not turn on.
The unit does not start
playback.
The angle cannot be changed.
Cannot play movie, photo or
audio files.
4
The remote control does not
work properly.
Recording
Symptom
Cannot record or does not
record successfully.
Timer record does not record
successfully.
You cannot enter a timer
programme when.
If two or more timer programs
overlap.
Cause & Solution
y Plug the power cord into the wall outlet securely.
y Insert a playable disc. (Check the disc type, color system, and regional
code.)
y Place the disc with the playback side down.
y Place the disc on the disc tray correctly inside the guide.
y Clean the disc.
y Cancel the Rating function or change the rating level.
y Multi-angles are not recorded on the DVD Video being played.
y The files are not recorded in a format that the unit can play.
y The unit does not support the codec of the movie file.
y The remote control is not pointed at the remote sensor of the unit.
y The remote control is too far from the unit.
y There is an obstacle in the path between the remote control and the
unit.
y The batteries in the remote control are exhausted.
Cause & Solution
y Check the remaining space on the HDD.
y If your source is copy-protected, you cannot record it using this
recorder.
y If you set a DTV rating for the recorder and higher rated digital
programs are received, the programme cannot be recorded. Change
the DTV rating level in order to record it.
y Clock is not set to correct time.
y The start time of the timer recording is past.
y When setting the recording programme, make sure you set the
recorder's built-in tuner, not the TV's built-in tuner.
y If the HDD is damaged, the recording may not complete successfully.
y The time you're trying to set has already passed.
y There are already 32 timer programs set.
y The earlier programme takes priority.
Advertisement
Table of Contents
